The tack strip can be removed using a pry bar, while the staples can either be hammered back in place, or removed using a scraper. Laminate flooring can be cut to install around stair rail spindles. Carpet will be dirt cheap in comparison. Take measurements from the spindle to the risers, and the edge of the tread on the outside. This is a project that can take quite some time and many would say it is not the most riveting work. Fill in the screw holes. This will reduce the likelihood of splitting the laminate boards.
I spent the morning visiting various flooring dealers, looking for Flexition or something similar. Stair accidents can be dangerous. If you happen to have a stair that has ceramic or even stone down to the floor, you could use the jamb saw with a masonry blade to under cut it also. Carpet is normally attached using adhesive tack strip, staples or both. But bear in mind: Nailing may damage the face of the laminate.
Another option is using the Cap-A -Tread Laminate Stair Renewal System with pre-attached stair nosing that offers easy glue-down installation. The bullnose is nailed on and I plan to remove it when I do the floor. The Flexitions seems like it would be perfect. It clearly shows the riser filling the space removed by cutting off the overhang. Also, laminate floors are easy to maintain and withstand various tests of time without getting damaged. After completion of the process, apply foam underlay and put your measured laminate material in place.
He said we should use real tile there— 13 x 13— but it's so far impossible to find matching tile this size. I have to agree with Stullis on this, I have seen carpenters and experienced cabinet makers machine this sort of thing up in minutes. The next thing you will need to do is tread pieces, riser pieces and stair nosing to length. Are you saying I should cut some stock to follow the shape of the opening and then round-over the edge? There are a few different ways to. One question, however…how much of the pre-existing bullnose was visible from underneath the nosing, once installed? It will be higher in case your furniture is in the same style as your house. Stairs are one of the largest surfaces in your home and choosing what material to cover them with has a big effect on the look and feel of your space.
We thought the cork underlayment would be the answer, but since that is a no go we need to rethink laminate on the stair treads. This is where you will cut. But is very slippery, to say the least. It is available online or through the Special Order program at your local Home Depot store. You can rent nail guns and chop saws thats another nice tool to use that helps you make very precise cuts in case you dont have these handy.
If you do decide to go with nailing, use a pneumatic automatic nailer. You can rent nail guns and chop saws thats another nice tool to use that helps you make very precise cuts in case you dont have these handy. Fit the laminate board around the spindle and press the flat cut end to the wall, with the tongue end fitted around the spindle. Installing laminate flooring on stairs is definitely one time you wont use do it as a floating-floor system, so do not use underlayment. Apply a bead of construction adhesive to the back of the piece, then press it into place and hold it for a few minutes to let it bond. Thank you for all your help and your video is great! Take the glued-together tread pieces which you assembled earlier and place them firmly onto the tread, with the tongue edge of the plank facing outwards. In fact your choice of Installing Laminate Flooring On Rounded Stairs can be related to your interior design.
If the edges of the plank are not perfectly aligned with the edges of the riser, you can trim them to fit. Solid Vinyl like Amtico would come out nice too, but the installer should be very experienced in wrapping steps. This type of trim is used on boxed- in staircases those which are closed in with stringers. Any advice on special tools or equipment needed to install laminate flooring on a staircase? They also said that all laminate bullnoses are that way. Also, how do you finish off the edge where the riser and tread meet? Therefore, it just won't do.
It is up to you whether you wish to put all of the riser pieces and tread pieces in place first, before installing the nosing, or if you want to complete each step fully before moving on to the next one. Theres another benefit to using a fairly liberal amount of construction adhesive when installing the stair nose that may not have occurred to you: In older homes, its not uncommon for wooden step treads to be worn down in the middle. You might also find extremely warped or loose treads. The glue should be a Liquid Nails® or construction-type glue dispensed from a glue gun. The best way is to remove the spindles and install them on top of the laminate -- but that's not always feasible. With a few specialized tools and materials that you can rent or buy at a home store and some woodworking techniques, though, do-it-yourselfers can create attractive, professional results. We were hoping to help deaden the sound on the stairs.
So, it must be done by professionals who are expert in this kind of business. If the edges of the plank are not perfectly aligned with the edges of the riser, you can trim them to fit. Having done this, pin the laminate floor using nails, therefore, preventing any movements before the adhesive dries off. I do have one question about the stairs — I purchased Allen + Roth laminate flooring with the pad already attached I have 2 bedrooms and a hallway to do as well and the matching stair bullnose. This type of trim is used on boxed- in staircases those which are closed in with stringers.
Installing the tread edge piece Measure the exposed edge of the tread and cut a piece of laminate to fit. Once glue is in place, we recommend drilling pilot holes and using screws, then using filler to hide the screws. Stair accidents can be extremely dangerous. Here is a link to pictures of all kinds of stairs. You can nail at the very top with a nail gun, the stair nose will cover these nails. Installing laminate flooring on stairs is definitely one time you wont use do it as a floating-floor system, so do not use underlayment. Most people may not encounter this, but when you do its best to know how to make it look good.